Controls - Husqvarna TE 250R 2013 Operation And Maintenance

CONTROLS

FUEL COCK
There is an ON-OFF fuel cock (1) on the right side of the
tank; make sure it is always on "ON" position.
There is a screw-type fuel cock (2) on the right side of the
tank; make sure it is always in its max. opening position.
On these models, the cocks operate only as by-passes;
ON-OFF cock has a fuel level sensor which sends the re-
serve indication to a light on the instrument panel (TE) or
on the control panel (TXC).
WARNING*: Be careful not to touch the hot
engine while operating the fuel valve.
EN - 10 SPECIFICATIONS - OPERATION - MAINTENANCE
SIDE STAND
These models have a side stand (1) on the left side of the mo-
torcycle.
WARNING*: The stand is designed to sup-
port the weight of the MOTORCYCLE ONLY. Do
not sit on the motorcycle using the stand for
support as this could cause structural failure
to the stand and could cause serious bodily
injury.
WARNING*: The motorcycle MUST be set on
the side stand ONLY AFTER the rider has got
off the vehicle. Stand AUTOMATICALLY folds
back to rest position once the vehicle is verti-
cal, no longer resting on the ground.
Periodically check the side stand (see "Periodical maintenance
card"); check that the springs are not damaged and that the
side stand freely moves. If the side stand is noisy, lubricate the
fastening pivot (A).
1
2
1
A