Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Neo-Neon SRL-6057-S
-
Page 1: User Manual
SRL-6057-S LED Par Lamp USER MANUAL Table of Content Part I General Information--------------------------------------------------------------------------------3 1.1 Introduction----------------------------------------------------------------------------------------3... -
Page 2: Table Of Contents
Attachment (DMX Address Quick Reference Chart) --------------------------------- --13 Part I General Information 1.1 Introduction You have purchased the SRL-6057-S, High Power LED Par Lamp series product. To assure reliable performance, please read the instructions in this manual thoroughly and carefully before operating. 1.2 Safety Information... -
Page 3: Unpacking
PART I General Information (continued) 1.3 Unpacking The SRL-6057-S has been thoroughly tested and shipped in perfect operating condition. Check the shipping carton carefully for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for damage and be sure all accessories necessary to operate the fixture have arrived intact. -
Page 4: Features
SRL-6057-S Par Lamp Power Supply: AC120V 60Hz or AC 220V 50Hz Power Consumption: Dimension (mm): L260×W260××H260 Note: Power configuration may differ by regions. Please be sure the outlet in your area is suitable for the fixture. 1.5 Features: Low power consumption ... -
Page 5: Ac Power
SRL-6057-S Par Lamp Operating Panel PART II Installation and Operation (continued) 2.2 AC Power The fixture’s mains lead may require a grounding-type plug connector that fits your... -
Page 6: Understanding Dmx
DMX compatible. B. DMX Cable Requirements: Your fixture, SRL-6057-S uses 3-pin XLR cable as its connection media. We provide each fixture a 3-meter 3-pin XLR cable for you to chain the fixtures. C. Connection of DMX... - Page 7 SRL-6057-S Par Lamp channel number from which the fixture starts to "listen" to the DMX control information sent out from the DMX controller. The allocation of this starting DMX address is achieved by combining various dipswitches. Please refer to related sections for further information.
- Page 8 SRL-6057-S Par Lamp Functions and the Dip of the 2 group： Work Mode Dip of the 2 group 1 2 3 4 5 6 7 8 Auto Program 1 0 0 0 0 * * * 0 Auto Program 2...
- Page 9 SRL-6057-S Par Lamp Channel 2 will control the Green LEDs, Channel 3 will control the Blue LEDs. While channel 4 is set more than 28, Channel 5 will control the speed of the Auto program. 2. channel 6 is not determined by channel 4.
-
Page 10: Part Iii Maintenance And Cleaning
SRL-6057-S Par Lamp group two dipswitches: DIP5 DIP6 DIP7 FADING 14.2% 28.4% 42.6% 56.8% 85.2% 100% The running speed of auto programs is adjusted by turning the knob VR located at the front panel of the fixture. D. Sound Active mode Turn the dipswitch #1 off and #8 of group 2 dipswitches on, the fixture will be working in sound active mode with its sound sensitivity adjustable through knob VR. -
Page 11: Replace The Fuse
SRL-6057-S Par Lamp lifespan and bright light output. While performing the cleaning, please always make sure that the power cord is disconnected from the mains and use a moist, lint-free cloth. Avoid using any alcohol or solvents, as they are harmful to the fixture. - Page 12 SRL-6057-S Par Lamp PART III Maintenance and Cleaning DMX Address Quick Reference Chart Dip Switch Position DMX DIP SWITCH SET 0=OFF 1=ON X=OFF or ON 128 160 192 224 256 288 320 352 384 416 448 480 ...
-
Page 13: Dmx Address
SRL-6057-S Par Lamp 118 150 182 214 246 278 310 342 374 406 438 470 502 119 151 183 215 247 279 311 343 375 407 439 471 503 120 152 184 216 248 280 312 344 376 408 440 472 504...