NEC NP04Wi Installation Manual page 12

1. Connect the USB cable and the holder to the camera unit.
 Connect the USB cable and the holder to the camera unit.
Connect the L-shaped terminal of the supplied USB cable (4.5m/14.8ft) to the USB port (type
B) on the camera unit.
 Fix the camera unit on the holder.
Engage two protrusions on the camera unit into the fixing holes on the holder and align the
position of screw holes. Fix the camera unit by one screw.
2. Fix the camera unit onto the projector.
* Fixing procedure for U321H is differed from for other models, UM351W, UM301W, UM361X, UM301X,
UM330X, UM280X, UM330W and UM280W
For UM351W/UM301W/UM361X/UM301X/UM330X/UM280X/UM330W/UM280W
- Remove the cable cover if it is mounted on the projector. Please follow the instructions on the
projector User's Manual for mounting/demounting the cable cover.
- Require one screw.
 Fix the camera unit on the cable cover.
From the external side of the cable cover, engage two protrusions on the holder into the fixing
holes on the cable cover, then align the position of fixing holes.
Fasten these with a screw putting from the inside of the cable cover.
1
2
ENG-10