Motor Unit - Miele DA 216-2 EXT Operating And Installation Instructions

(not when operating the external fan)
with air extraction
If a non-return flap is not present in
the venting system, the
supplied must be fitted into the
exhaust connection in the motor unit.
The flaps must open upwards.
The cooker hood is designed to take
ø 150 mm exhaust ducting.
If 125 mm ø exhaust ducting has to
be used the
to be fitted into the exhaust connec-
tion on the motor unit.
(see "Connection for air extraction".
With recirculation mode:
Fit the reducing collar onto the ex-
haust connection.
The non-return flap is not required.
First loosely screw the two locking
nuts onto the threaded bolts on re-
taining plate A.
Leave a gap of approx. 3 mm for
hanging the motor on afterwards.
needs
Fit the motor unit onto the hooks on
retaining plate A and slide down be-
hind the nuts.
Tighten the nuts.
27