Table of Contents
Advertisement
Further settings
^ By touching the X or Y sensor you
can now select:
0: keypad tone off; door alarm off
1: keypad tone off; door alarm on
(after 4 minutes)
2: keypad tone off; door alarm on
(after 2 minutes)
3: keypad tone on; door alarm on
(after 2 minutes)
^ Touch the OK sensor to confirm your
selection.
The selected setting is saved and the
) symbol flashes.
^ Touch the settings sensor to leave
settings mode.
Otherwise, the electronics will leave
settings mode automatically after
approx. one minute.
36
Display brightness s
You can adjust the display brightness
to suit the light conditions in the room.
The display brightness can be adjusted
in steps from 1 to 3. The factory default
setting is 3 (maximum brightness).
Changing the display brightness
^ Touch the settings sensor.
All selectable symbols appear in the
display and the 0 symbol flashes.
^ Touch the sensors for setting the
temperature (X or Y) repeatedly until
the s symbol flashes in the display.
^ Touch the OK sensor to confirm your
selection.
The last selected setting flashes in the
display and the s symbol lights up.
Advertisement
Table of Contents
