Configuring The Fingerprint Sensor; Using The Security Lock - Fujitsu Lifebook U904 Operating Manual

Configuring the fingerprint sensor
Fingerprintsensor Fingerprintsensor
The fingerprint sensor can record an image of a fingerprint. With additional fingerprint
software, this image can be processed and used instead of a password.
The current Workplace Protect software for palm and fingerprint sensors can be found on
the Internet at
"http://www.fujitsu.com/fts/solutions/high-tech/solutions/workplace/security/secure/index.html".

Using the Security Lock

Your device comes with a Security Lock mechanism for the Kensington Lock Cable. You
can use the Kensington Lock Cable, a sturdy steel cable, to help protect your notebook
from theft. The Kensington Lock Cable is available as an accessory.
Fujitsu recommends the use of a combination lock.
Attach another Kensington Lock Cable to your Port Replicator to protect your Port
Replicator from theft as well. There are two security lock devices on your Port Replicator.
Fujitsu
1
K
► You must install the fingerprint software
in order to be able to use the
fingerprint sensor (1).
► Fit the Kensington Lock Cable to the
mechanism on your notebook.
Anti-theftprotection Mechanicalbackup Security Lock UsingtheKensingtonLock Cable
Security functions
41