Setting The Hotel Option Data - Samsung HG32AD690 Instruction Manual

To Enter: Press the MUTE
To Exit from this menu : power off and turn on again.
✎ Depending on Model and Region, some menus do not exist on the TV set.
Hotel TV Function
Category Item
Hospitality
Hospitality Mode Standalone
Mode
SI Vendor SI Vendor
Power On Channel Last Saved
Power On Channel
Num
Power On Channel
Type
Power On Volume Last Saved
Power On
Power On Volume
Num
Min Volume
Max Volume
Power On Source
Power On Option
Channel Setup
Channel Editor
Mixed Channel
Channel
Map
Dynamic SI
Channel Rescan
Message

Setting the Hotel Option Data

→ 1 → 1 → 9 → ENTERE buttons in order. (From the Hospitality mode, the Standalone mode is set.)
Description
Initial value
Select Hospitality mode.
• Interactive mode : TV works with an SI STB or SBB.
• Standalone mode : TV works alone, without an SI STB or SBB.
• Interactive mode : Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek /
Seachange / MDC / Innvne
OFF
• Standalone mode : Smoovie
Set the default values that will be applied when the TV is turned on.
• User Defined : Lets you set Power On Channel and Channel Type manually. See Power On
Channel and Channel Type below.
• Last Saved : If you select this item, when the TV is turned on, it displays the channel it was
displaying when it was turned off.
1 When the TV is turned on, it switches automatically to this channel.
Select channel band : AIR (analogue air band), DTV (digital air band), CATV (analogue cable
ATV
band), CDTV (digital cable band)
• User Defined : Lets you set the Power On Volume manually. See Power On Volume below.
• Last Saved : When the TV is turned on, it returns to the volume that had been set when the
power had been turned off.
10 The TV turns on with this Volume Level in Stand Alone Hospitality mode.
0 The minimum Volume Level the user can set in Stand Alone Hospitality mode.
100 The maximum Volume Level the user can set in Stand Alone Hospitality mode.
TV Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
• Last Option : Returns to its last Power state. If it was in Stand-by, it returns to Stand-by. If
Last
it was on, it turns on.
Option
• Power On : When the power returns, the TV turns on.
• Standby : When the power returns, the TV enters the Standby mode.
Gives you direct, immediate access to some of the Channel menu functions on the user
Channel menu such as Auto Tuning, Antenna selection, etc.
The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel
Editor you can:
• Change the channel numbers and names, and sort the channels in your desired channel
number order.
• Apply the video mute to channels you select. The video mute blanks out the video from a
channel and outputs only the sound while displaying a speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily, without your
having to display each channel directly.
This Feature enables showing/browsing all antenna type (Air/Cable or Satellite) channels at
the same time.
• ON: When ON, guests can access the complete Channel Map irrespective of the selected
ON antenna type. The Channel list will also populate Air as well Cable type channels.
• OFF: When OFF, guest can access the Channel Map corresponding to the selected
antenna type [AIR/CABLE or Satellite] only. The Channel list/Editor will only show the
selected antenna type channels.
• ON : Check the DTV Programme channel number. (the TV channel editor is inaccessible)
• OFF: Do not check the DTV Programme channel number.
OFF
(the DTV channel editor is accessible, but additional channel Programme number update is
not supported)
When there is a mismatch between the data in the channel map and the transmitted data ,
the TV autotunes the channels to restore the data/parameters in the channel map.
• ON: When Channel Rescan Message is ON, The OSD showing that the channels are being
ON
rescanned will be displayed to Hotel Guests.
• OFF: A Hotel Admin can turn the Channel Rescan Message OFF, if the rescan message
OSD should not to be displayed to Hotel Guests.
23
English