Related Manuals for Hammerhead HCSD040
Summary of Contents for Hammerhead HCSD040
- Page 1 4V LITHIUM RECHARGEABLE SCREWDRIVER MODEL HCSD040 CHARGE THE INTEGRATED LITHIUM-ION MADE IN CHINA 2015 BATTERY BEFORE FIRST USE.
-
Page 2: Product Specifications
PRODUCT SPECIFICATIONS Battery voltage 4V DC Lithium No-load speed 230 /min Collet size 6.35mm Hex Battery capacity 1300mAh Level of acoustic pressure L =3 dB(A)) 51.23 dB(A) Level of acoustic power L =2.5 dB(A)) 62.23 dB(A) Level of vibration a (K=1.5 m/s 0.370 m/s Wire stripping capacity... -
Page 3: General Power Tool Safety Warnings
GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and WARNING instructions may result in electric shock, fire and/or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 4 may result in serious personal injury. b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and /or battery pack, picking up or carrying the tool.
- Page 5 performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) Battery tool use and care a) Recharge only with the charger specified by the manufacturer. A charging adaptor that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Page 6 EXTRA SAFETY REGULATIONS CONCERNING BATTERY • WARNING! This product is equipped with a built-in battery! Do not attempt to open the enclosure to access the battery! • Do not attempt to charge the product with any other charging adaptor than the one supplied.
- Page 7 • Charge the product indoors only as the charging adaptor is designed for indoor use only. • Do not charge non-rechargeable batteries. • Protect the charging adaptor against moisture and wet conditions. There is a danger of electric shock. • Do not place any object on top of the charging adaptor as it could cause overheating. Do not place the charging adaptor near any heat source.
- Page 8 DESCRIPTION OF THE SYMBOLS The use of symbols in this manual is intended to draw your attention to possible risks. The safety symbols and the explanations that accompany them must be perfectly understood. The warnings in themselves do not remove the risks and cannot replace correct actions for preventing accidents.
- Page 9 Live-wire detection button Non-contact Live-Wire Detector Wire-Stripping Lever Forward/Reverse Arrow Indicators Short-circuit-proof safety isolating transformer SMPS (Switch mode power supply unit) IMPORTANT: This tool should only be serviced only by a qualified service technician. PREPARATION Before attempting to use the tool, familiarize yourself with all of its operating features and safety requirements.
- Page 10 PACKAGE CONTENTS SL3-4 SL6-8 4V LITHIUM RECHARGEABLE SCREWDRIVER...
- Page 11 PARTS DESCRIPTION 6.35mm Hex Collet Forward/Reverse Selector AC Live-Wire Detection Button AC Non-contact Live-Wire Detector Detection Indicator LED Worklight Wire Bending Hole Wire Stripper Charging Indicator light Power Supply USB Charging Cable Bits Magnetic Insert Bit Holder Plastic Bit holder Charging Port Handle 4V LITHIUM RECHARGEABLE SCREWDRIVER...
- Page 12 OPERATING INSTRUCTIONS DANGER: NEVER INSERT ANY PART OF THE TOOL, INCLUDING BIT, INTO AN WARNING ELECTRICAL OUTLET FOR ANY REASON. NEVER TOUCH ANY PORTION OF THE TOOL TO ANY POTENTIALLY LIVE CIRCUIT. Failure to obey this warning could cause electric shock and other serious personal injury.
- Page 13 2. Forward/Reverse Selector The forward/reverse selector FORWARD determines the rotating direction of the tool and also serves as a tool on/ off switch. With the tool held in the normal operating position, as shown in Figure 2. a. To tighten a screw, rotate the forward/reverse selector FORWARD/ clockwise.
- Page 14 5. Magnetic Insert Bit Holder The magnetic insert bit holder functions to extend the bit in tight places. It is compatible with 6.35mm shanks. a. To install the magnetic insert bit holder, push it into the collet until it is firmly in place. MAGNETIC INSERT BIT HOLDER b.
- Page 15 forward/reverse selector counterclockwise. 8. Recommended Screws for Various PRE-MOUNTING Applications HOLE The tool is versatile for use with a variety of screws. SELF-TAPPING SCREW Driving Materials Screws ELECTRICAL With pre- Self-Tapping OUTLET mounting Screws (≤ST3.5) holes (see Fig. 7a) Electrical With Outlet Machine...
- Page 16 9. Detecting AC Live Wires in Cords, Switches and Outlets NON-CONTACT You can use the non-contact live- LIVE-WIRE wire detector function of the tool to DETECTOR determine if a cord, power outlet or switch is live. WIRE NEVER INSERT ANY PART OF WARNING DETECTION THE TOOL, INCLUDING BIT, INTO AN...
- Page 17 10. Wire Stripping The tool is fitted with a wire stripper for stripping 0.5~2.5mm wire sizes. a. Select the opening in the stripping WIRE STRIPPER lever that matches the wire size. LEVER b. Insert the wire and depress the wire stripper lever to clamp the wire stripper around the wire.
- Page 18 MAINTENANCE CLEANING Avoid using solvents when cleaning plastic parts. Most plastic parts are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc. STORING Store the machine, operating instructions and where necessary the accessories in the origi- nal packaging.
- Page 19 4V LITHIUM RECHARGEABLE SCREWDRIVER...
- Page 20 4V LITHIUM RECHARGEABLE SCREWDRIVER...