6800969001_EN.book Page 10 Monday, January 13, 2014 11:40 AM
Powering Up the Pager
Rotate the On/Off/Volume Control Knob
clockwise until you hear a click.
You will hear an
audible beep and/or
vibrate, depending on
the Function Switch
programming,
indicating that the
device is turned on.
If your pager does not
power up, check your
battery. Make sure that
it is charged and
properly attached. If
your pager still does
not power up, contact your dealer.
To turn off the pager, rotate this knob
counterclockwise, beyond the white volume
10
English
level indicator, until you hear a click, unless
the Always On feature is enabled.
For more details on Always On, refer to
"Pager Programming Software (PPS) on
page 17."
Adjusting the Volume
To increase the
volume, turn the On/
Off/Volume Control
Knob clockwise.
To decrease the
volume, turn this
knob counterclockwise.
Note: Turning the knob counterclockwise
beyond the white volume level indicator
(until a click is heard) will turn off the pager.