Contrast; Filter Check; Showroom Program; Factory Default - Miele G 5500 Operating Instructions Manual

Settings menu

Contrast

There are seven different display
contrast settings.
^ Select the desired contrast and
confirm with the center button.

Filter check

This selection allows you to set the
number of cycles run before the filter
check message shows.
You can select between 30 and 60
cycles.
The "Filter check" message is set by
default to 50 cycles.
^ Select the desired interval and
confirm with the center button.

Showroom program

Only for showrooms.
The dishwasher has a demo program
for dealer's showrooms.
Demo with wash sound
–
The program activates the pumps to
demonstrate the wash sound.
44
Turning the demo mode on
^ Select the desired option.
^ Select the option
^ Close the Settings menu.
^ Press the Start / Stop button.
Demo mode will begin.
Turning the demo mode off
Demo mode will turn off automatically
when it reaches the end of the cycle.

Factory default

If you have altered any settings from
the factory default, you can reset them
to the factory default settings.
^ Select

Leaving the Settings menu

Use
:
^ Select
The display will then show the last
program selected and the indicator
light for the program selected will come
on.
the center button.
Reset
and confirm with the
center button.
Close
to leave the Settings menu.
Close
and confirm with the
center button.
On
and confirm with