Ppp Configuration - D-Link DSL-300G User Manual

PPP Configuration

PPP is configured as a group of software settings associated with the ADSL port. Although the device has only
one physical ADSL port, the Modem can be defined with more than one group of PPP settings. Each group of
settings is called a PPP interface and is given a name, such as ppp-0, ppp-1, etc.
You can configure the following settings on the PPP Configuration page:
Inactivity TimeOut(mins): - The time in minutes that must elapse before a PPP connection
times-out due to inactivity.
Ignore WAN to LAN traffic while monitoring activity: - When enabled, data traffic
traveling in the incoming direction -- from the WAN port to the LAN port -- will not count as
activity on the WAN port; i.e., it will not prevent the connection from being terminated if it has
been otherwise inactive for the specified time.
To configure a new PPP interface click the Add button. A new menu appears.
DSL-300G ADSL Modem User's Guide
PPP Configuration
PPP Interface - Add
21