Table of Contents
Advertisement
Example:To change the default factory settings to pound units use [id c. S. < _ < . ] in the factory
settings, (cont.)
3
Pressing the [Set] key to restore measurement mode.
S £ S u IB
a on nig
SJ
Pressing the | Set | key will reset the
measurement mode
4
Pressing the [Function] key to change the units of
measurement
g
Pcs
Press the | Function] key.
Each press of the key changes the units
of measurement to be displayed, as
follows: [g] -* [Ib] -»[Pcs] -> [%] -> [g]
'b
r
it Key Points of the Procedure it
1.
When set values are entered in the function items [8 I. 5. u.] to [8 5. S. u.] prior to use, the
desired unit of measurement to be displayed can be selected simply pressing the | Function"]
key. For more information on the units of measurement that can be set, please refer to "4.2
Description of Functions," on page 13.
2.
The units are displayed in the same sequence as the settings made from [8 1.5. u.] to
[8S.5.U.].
3.
If [0u]
is set, no unit of measurement will be displayed, even when units of measurement are set
in subsequent items.
4.
[0 0] cannot be set in [8 l.5.u.]-
5.
If the same unit of measurement is set multiple times, the second time (and all subsequent times)
the unit(s) occurs, it will be ignored when the display switches.
6.
The units can be set only on a balance for which the lock switch is off. Units cannot be set on a
balance with a lock switch sealed.
7.
When units other than [g] or [ct] is selected and the power is turned off, [g] is automatically
selected the next time the power is turned on. ( under the lock switch in on.)
16
Advertisement
Table of Contents
