Table of Contents
Advertisement
Watching TV
e (Mute)
Using e (Mute) on the remote control unit
current sound output.
Press e (Mute).
1
• The sound is silenced.
• "
" is displayed while the mute function is on.
MUTE
Press e (Mute) again to cancel the mute.
2
MPX
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
Each time you press MPX the mode switches as
follows.
In the NICAM TV broadcasts
Signal
When receiving a
stereo signal
When receiving a
bilingual signal
When receiving a
monaural signal
In the TV mode of A2 TV broadcasts
Signal
When receiving a
stereo signal
When receiving a
bilingual signal
When receiving a
monaural signal
M3H_EN_160126.indd 23
to mute the
Mode switch
NICAM STEREO, FM mono
NICAM DUAL I, NICAM DUAL II,
FM mono
NICAM MONO, FM mono
Mode switch
NICAM STEREO, FM mono
NICAM DUAL I, NICAM DUAL II,
FM mono
NICAM MONO, FM mono
SLEEP
Auto power-off at a designated time. This function is
conveniently used when, for instance, going to bed
while watching TV.
Press SLEEP.
1
• Remaining time displays when sleep timer has
been set.
Each time you press SLEEP, the remaining
2
time switches as shown below.
1 0 m i n
2 0 m i n
3 0 m i n
O f f
2 4 0 m i n
NOTE
• When the time has been set, countdown automatically
starts.
• Thirty seconds before the preset of time expires, the
remaining time will be displayed.
• Select "Off" by pressing SLEEP to cancel the sleep timer.
DISPLAY
While watching DTV you can check the extended
programme information on the screen using DISPLAY
on the remote control.
• You can cancel this info by pressing DISPLAY
again.
CH.LIST
Display the channel list.
Press CH.LIST, and then display the "Channel
1
List" of DTV and ATV on the screen.
Press a /b to select the desired channel,
2
and then press OK to switch to the selected
channel.
• When received a encryption program that
cannot be played, the "key" icon will be
displayed .
6 0 m i n
9 0 m i n
1 8 0 m i n
1 2 0 m i n
23
2016/1/27 22:58:51
Advertisement
Table of Contents
