Asus Motherboard NR-LSR User Manual page 42

3. ATX power connector (24/20-pin EATXPWR)
This connector is for a 24/20-pin power plug from an ATX 12V power
supply. The plug from the power supply is designed to fit this connector
in only one orientation. Find the proper orientation and push down
firmly until the plug completely fits.
Make sure that your ATX 12V power supply can provide 8A on the
+12V lead and at least 1A on the +5-volt standby lead (+5VSB). The
minimum recommended wattage is 230W, or 300W for a fully
configured system. The system may become unstable and may
experience difficulty powering up if the power supply is inadequate.
NR-LSR ATX Power Connector
2-16
Power Connector
®
NR-LSR
EATXPWR
24-pin
Chapter 2: Hardware information
1
For Power Supply
with 20-pin
Power Connector