About The Usb Memory Recorder - Yamaha RIVAGE PM10 Operation Manual

Recording  2-track USB recorder
Recording
This chapter explains the functionality and operations of the recorder.
2-track USB recorder

About the USB memory recorder

The RIVAGE PM10 system features an easy-to-use 2-track USB recorder.
The 2-track USB recorder enables you to record output signals from the STEREO bus or a MIX bus
to a connected USB flash drive. You can also use it to play background music or sound effects that
are stored on a USB flash drive by assigning them to an input channel. Due to a built-in SRC
(sampling rate converter), as well as the input and output from the 2-track USB recorder, you do not
have to worry about differences in sampling rates between the system and the recording/playback
files. If the system's sampling rate is the same as that of the recording/playback files, the SRC will
automatically be bypassed.
The RIVAGE PM10 system supports WAV (uncompressed PCM) and MP3 (MPEG-1 Audio Layer-
3) file formats for recording and playback.
■ Supported recording format
WAV files
• Bit depth: 16-bit/24-bit
• Sampling rate: 44.1 kHz/48 kHz/88.2 kHz/96 kHz
MP3 file
• Bit rate: 192 kbps/256 kbps/320 kbps
• Sampling rate: 44.1 kHz/48 kHz
■ Supported playback format
WAV files
• Bit depth: 16-bit/24-bit
• Sampling rate: 44.1 kHz/48 kHz/88.2 kHz/96 kHz
MP3 file
• Bit rate: No restriction
• Sampling rate: 44.1 kHz/48 kHz
■ Signal flow for the USB memory recorder
RECORDER
MIX1-72
INPUT
MATRIX1-36
STEREO A/B
CH DIRECT OUT
L
INPUT1-144
R
PLAYBACK
OUT
NOTE
Recording and playback cannot be done simultaneously.
182
CONTENTS FUNCTION MAP
L L
R R
USB memory
SRC
recorder
L
R
RIVAGE PM10 Operation Manual
FAQ