Mx-Csx1/Csx2 (500-Sheet Paper Feed Unit); Unpacking; Installation - Sharp MX-B381 Installation Manual

[2] MX-CSX1/CSX2 (500-SHEET PAPER FEED UNIT)

MX-B401
1.

Unpacking

A. Removal of the 500 sheet paper feed unit
(1) MX-CSX1/CSX2
B. Removal of the fixing tape and protection
material
(1) MX-CSX1/CSX2
1) Remove the 500 sheet paper feed unit from the polyethylene
bag, and remove the fixing tape and the protection material.
MX-B381/B401 MX-CSX1/CSX2 (500-SHEET PAPER FEED UNIT) 2 – 1
Service Manual
2.

Installation

<Precautions for installation>
Before execution of installation, check to confirm that the communi-
cation lamp on the operation panel and the data lamp under it are
not lighted or blinking.
A. Turn off the power of the main unit
1) Turn OFF the power switch on the operation panel.
2) Check to confirm that the operation panel is turned OFF, and
then turn OFF the power switch.
3) Disconnect the power plug from the power outlet.
B. Install the MX-CSX1 or the MX-CSX2 to the MX-
CSX2.
* In the example below, installation of the MX-CSX1 to the MX-
CSX2 is described. Installation of the MX-CSX2 to another MX-
CSX2 is performed similarly.
1) Put the MC-CSX1 on the MX-CSX2 so that they fit together.
NOTE: When holding the main unit with the MX-CSX2 and the
MX-CSX1 installed, use two persons.