Dell S2810dn User Manual page 154

Fault Tone
Alert Tone
Out of Paper
Low Toner Alert
Auto Clear Alert
All Tones
mm / inch
Purpose:
To specify the default measurement unit displayed after the numeric value on the operator panel.
Values:
*
Millimeters (mm)
Inches (")
NOTE:
The default for
mm/inch
Default Paper Size
Purpose:
To specify the default paper size.
Values:
mm series
*1
A4
Letter
*1
Denotes country-specific factory default values.
inch series
A4
*1
Letter
*1
Denotes country-specific factory default values.
154
Understanding the Printer Menus
Off Does not emit a tone when a job ends abnormally.
*
On Emits a tone when a job ends abnormally.
Off Does not emit a tone when a problem occurs.
*
On Emits a tone when a problem occurs.
Off Does not emit a tone when the printer runs out of paper.
*
On Emits a tone when the printer runs out of paper.
Off Does not emit a tone when the toner is low.
*
On Emits a tone when the toner is low.
*
Off
Does not emit a tone 5 seconds before the printer performs auto clear.
On
Emits a tone 5 seconds before the printer performs auto clear.
*
Off
Disables all the alert tones.
On Enables all the alert tones at once.
Selects millimeter as the default measurement unit.
Selects inch as the default measurement unit.
varies depending on other settings, such as and
Country Document Size
.