Table of Contents
Advertisement
(3) Connect the USB cable and the network cable.
1) Attach the supplied cable clamp to the position shown in the
illustration.
2) Connect the USB cable to the network expansion kit and the
main unit.
At this time, reduce slack of the cable with the cable clamp as
shown in the illustration.
3) Connect the network cable.
Insert the power plug of the copier to the outlet, turn the main
switch of the copier to the "ON" position, and perform network
setting and installation of the software.
GA-1330 UNPACKING AND INSTALLATION 3 - 2
Advertisement
Table of Contents
