Emergency Starting - Honda BF75D Owner's Manual

STARTING THE ENGINE

Emergency Starting

ENGINE COVER FIXING LEVER
(front/rear)
If the starting system does not operate
properly for some reasons, the engine
can be started using the emergency
starter rope in the tool kit.
1. Turn the engine switch key to the
OFF position.
2. Raise the front and rear fixing
levers, and remove the engine
cover.
84
6 mm WASHER
CLAMP
HOOKS
BREATHER TUBE
3. Release the breather tube from the
four clamps.
4. Remove 6 × 25 mm flange bolt and
washer, then remove the ACG
cover.
5. Secure the breather tube to the
clamp of the silencer case.
6 × 25 mm
FLANGE BOLT
ACG COVER
CLAMPS
CLAMP
(on the silencer case)
Take care not to lose the bolt and
washer.