Remote Access - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual

Remote Access

On the Advanced / Remote access page, you can configure access to the web-based interface
of the router. By default, the access from external networks to the router is closed. If you need to
allow access to the router from the external network, create relevant rules.
To create a new rule, click the Add button. In the line displayed, you can specify the following
parameters:
Parameter
IP address
Mask
Public port
Protocol
After specifying the needed parameters, click the Apply button.
To edit a rule for remote access, select a needed field in the relevant line of the table, change its
value, and click the Apply button.
To remove a rule for remote access, select the checkbox located to the left of the relevant line in the
table and click the Apply button.
Figure 106. The Advanced / Remote access page.
A host or a subnet to which the rule is applied.
The mask of the subnet.
An external port of the router. You can specify only one port.
The protocol available for remote management of the router.
Page 136 of 169
Configuring via Web-based Interface
Description