Optics Block Assembly-2; Ps Converter And Main Mirror - Sony VPL-HS3 Service Manual

1-3-10. Optics Block Assembly-2

. Remove the optics block assembly-1. (Refer to 1-3-9.)
5 Four screws
(+PSW 3x8)
2 Remove the aperture unit
in the direction of the arrow.

1-3-11. PS Converter and Main Mirror

. Remove the optics block assembly-1. (Refer to 1-3-9.)
1 Two screws
(+B 3x6)
6 PS com aperture
2 Remove the aperture unit
in the direction of the arrow.
1-8
1 Two screws
(+PSW 3x8)
4 Unit cover (R)
5 PS converter
Note: Marked with indicates as shown beloe.
3 Loosen the screw.
4 Lamp assembly
7 Optisc block assembly-2
6 Frame base, Projection lens assembly,
Prims block assembly
3 Two screws
(+B 3x6)
Marking
9 Lens-1 fly eye
8 UV-PRE-CUT filter
7 Lens-2 fly eye
0 Three main mirror
fasteners (A)
!= Main mirror
Projection side
!- Main mirror
fastener (B)
Marked side
Flat side
VPL-HS3