Electrolux 6000 series Service Manual page 64

Failure code
E97 Console control problem
E98 Console control problem
EB1 Incoming power frequency out of limits.
EB2 Incoming line voltage above 130 VAC.
EB3 Incoming line voltage below 90 VAC.
EF1 Clogged drain pump.
EF2 To much soap.
EBE Console control problem
EBF Console control problem
EF5 NTC temperature for the hot water valve over the limits.
Fault condition
64
Check
Replace the control board.
Replace the control board.
Refer to test (15)
Check voltage at the outlet.
If below 130 VAC replace the
control board.
Check voltage at the outlet.
If above 90 VAC replace the
control board.
Unclog the drain pump.
Advise customer to reduce
the amount of soap they are
using.
Replace the control board.
Replace the control board.
Hot and cold water hoses
switched.