Control Panel Functions - Hitachi BD-S5500 Operating Instructions Manual

Control Panel Functions

Operation status indicators (indicate the current operation)
LOAD SENSING Weighing laundry.
ADDING Dissolving detergent.
DETERGENT
DRAINING Draining water.
REMOVING Removing excess foam. (After
FOAM draining water, water for removing
foam is injected from the front side
of the drum for up to 15 minutes.)
PAUSE Pausing.
Remaining time, amount of
detergent, delay time, and error
code indicators (P. 28, 62)
Indicates the amount of detergent and the
remaining time after operation starts.
Displays the delay time with each press
of the <DELAY START> button.
After the delayed operation starts, only
[DELAY] is displayed.
Detergent indicator (P. 28)
Indicates the recommended amount of
detergent to use.
Using the HOT WASH
function (P. 72)
Blow hot air onto
laundry to activate the
detergent for more
complete cleaning.
[HOT WASH] is
displayed when this
function is set, and blinks
during the operation.
This function cannot be
used in the [BLANKET],
[DELICATE] and
[TUB CLEAN] programs,
and <<DRY>>
operations.
Buttons that function differently when held for 3 seconds after turning on the power
Turn the Tangle-Free Finish function on or off.
Change the operation start/finish sound.
10
Using the
Changing the cycle settings
STEAM IRON
function (P. 56)
Change the combination or
Press the
settings of <WASH>, <RINSE>,
<STEAM IRON>
<SPIN>, and <DRY> cycles.
button to steam
Press the <PAUSE> button after the
out wrinkles of
machine starts to change the settings.
clothes. The settings cannot be changed after
the <WASH> cycle finishes, or when
[STEAM IRON]
only the <WASH> cycle is operated.
is displayed
The settings cannot be changed
when this
for some programs.
function is set.
(P. 73)
(P. 68)
BALANCING Untangle operation in progress to
CLOTHES correct concentration of laundry on
one side.
REVIEWING Reviewing the remaining time during
TIME drying.
TUB COOLING Cooling the inside of the drum.
WIND IRON Appears when a program that
includes the [WIND IRON] operation
is selected. Blinks during the
[WIND IRON] operation.
FLUFFY Continuing drum rotation to maintain
CLOTHES softness of laundry after drying.
(P. 59, 64, 65)
Turn the Fluffy Clothes function on or off.
Turn the pre-finish sound on or off.
Adjusting the spin
speed and level of
drying (P. 69)
Adjust the spin speed
or level of drying to
one of three levels:
[EXTRA], [REGULAR],
or [MILD].
The factory default
setting is [REGULAR].
(P. 73)
(P. 68)