❑ Mono
Switches between stereo and monaural for Zone2 or Zone3 output.
Settings
Off (default)
Produces stereo sounds in Zone2 or Zone3.
On
Produces monaural sounds in Zone2 or Zone3.
■
Monitor Out Assign
Select the zone for which the MONITOR OUT/ZONE OUT (COMPONENT VIDEO, S
VIDEO and VIDEO) jacks are used.
Settings
Main (default), Zone2, Zone3
• The video conversion between the analog video jacks does not work for multi-zone video output. To watch
videos played back on a video device on the zone video monitor, you need to connect the video monitor to
this unit in the same way as the video device.
■
Party Mode Set
Enables/disables switching to the party mode (p.90) for each zone.
Choice
Target: Zone2, Target: Zone3
Settings
Disable
Disables switching to the party mode.
Enables switching to the party mode. You can turn on/off the party
Enable (default)
mode by pressing PARTY on the remote control.
■
Zone Scene Rename
Changes the scene names (for Zone2 or Zone3) displayed on the front display or TV
screen.
■
Setup procedure
1
Use the cursor keys to select a zone and press ENTER.
2
Use the cursor keys to select a scene to be renamed and press ENTER.
3
Press ENTER, use the cursor keys to rename, and then press ENTER again.
4
Use the cursor keys to select "OK" and press ENTER.
• To clear the entry, select "CLEAR".
5
To exit from the menu, press ON SCREEN.
119
En