Problem Solver - GE DDE8506M Use And Care Manual

The Problem Solver
PROBLEM
WRINKLING IN
PERMANENT PRESS
AND "NO-IRON"
ITEMS (continued)
If you need more help.. call, toll free:
GE Answer Center@
consumer information service
(continued)
POSSIBLE CAUSE AND REMEDY
Accumulation of lime scale due to use of carbonate detergents. If you must use a
non-phosphate detergent, avoid the use of a high-carbonate detergent.
Failure to use fabric softener. Proper use of fabric softener will minimize wrin~ing.
. Rerinse and dry on "Permanent Press" setting.
If unsuccessful, retumble on
Iron carefully.
Send to dry cleaners for pressing.
Some wrirddes may remain which cannot be removed:
good laundry
you
out wrirdded, the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic. Since it's the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
procedures and Permanent press
12
and hang immediately.