Single Slot USB/Serial Cradle
This section describes how to set up and use a Single Slot USB/Serial cradle with the MC75A. For USB
communication setup procedures see
The Single Slot USB/Serial Cradle:
•
Provides 5.4 VDC power for operating the MC75A.
•
Synchronizes information between the MC75A and a host computer. See
information on setting up a partnership between the MC75A and a host computer.
•
Charges the MC75A's battery.
•
Charges a spare battery.
Setup
USB Port
Single Slot USB/Serial Cradle Power and USB Connections
Figure 2-1
Charging the MC75A Battery
Connect the cradle to power. Insert the MC75A into the MC75A slot to begin charging.
Chapter 3,
ActiveSync.
Power Supply
Power Port
Accessories
Chapter 3, ActiveSync
for
2 - 3