Advertisement
Cleaning, Care & Maintenance
A
•
BUFFALO DEALER OR QUALIFIED TECHNICIAN
SHOULD CARRY OUT REPAIRS IF REQUIRED.
A
•
LWAYS SWITCH OFF THE APPLIANCE, DISCONNECT
THE POWER SUPPLY AND ALLOW TO COOL BEFORE
CLEANING OR PERFORMING MAINTENANCE.
I
•
F NECESSARY WIPE THE EXTERIOR WITH A SOFT
CLOTH AND WARM SOAPY WATER.
D
•
RY THOROUGHLY AFTER CLEANING.
Crumb Tray
P
ERIODICALLY EMPTY THE CRUMB TRAY (LOCATED AT
THE BOTTOM OF THE APPLIANCE). SLIDE THE TRAY OUT
TO EMPTY. SLOT BACK IN SECURELY WHEN REPLACING
THE TRAY.
Telephone Helpline: 0845 146 2887 (United Kingdom)
Troubleshooting
If your BUFFALO appliance develops a fault, please check the following table
before making a call to the Helpline.
Fault
Probable Cause
The appliance is not working
The appliance is not
switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Element has expired
Electrical Wiring
This appliance is supplied with a 3 pin, moulded, BS1363 plug and lead, with a
13 amp fuse as standard.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the
event of any emergency disconnection being required they must be readily
accessible.
Action
Check the appliance is
plugged in correctly
and switched on
Call BUFFALO agent or
qualified technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or
qualified technician
Call BUFFALO agent or
qualified technician
Advertisement
