GE JD750SF Dimension Manual

JD750SF
GE 30" Drop-In Electric Convection Range
Dimensions and Installation Information (in inches)
Note: Cabinets installed adjacent to slide-in ranges must have an
adhesion spec of at least 194° temperature rating.
Note: To reduce possibility of scorching the side walls above the
countertop when no load is present on burners, it is recommended
that a minimum of 6" spacing from adjacent side wall be allowed for
possible extended, high-heat, element operation.
IMPORTANT: 30" DROP-IN RANGES ARE DESIGNED TO HANG
FROM THE COUNTERTOP. IT DOES NOT REST ON THE FLOOR.
FOR INSTALLATION ALTERNATIVES, REFER TO INSTALLATION
INSTRUCTIONS PACKED WITH PRODUCT.
Optional Kits For Drop-In Electric Ranges (Available At Additional Cost)
Accessory Backguards
(Attaches to the back of range
as a backguard when unit is installed
in 30" free-standing cutout)
JXS32SS (Stainless) - 4" High
JXS32WW (White) - 4" High
JXS32BB (Black) - 4" High
Rear Filler Strip
WB07T10680 - Black Filler Strip Assembly
Installation information: Before installing,
consult installation instructions packed with
product for current dimensional data.
KW Rating
240V 12.6
208V
9.5
Breaker Size
240V 40 Amps
208V 40 Amps
If necessary,
build upsides
to 1-1/4" thick
to provide
countertop
support
If you are NOT using the
Filler strip or Backguard:
If you are NOT using the
Filler strip or Backguard:
23-3/16
30
If you are using the
Filler strip or Backguard:
If you are using the If you are NOT using the
Filler strip or Backguard: Filler strip or Backguard:
25
30
If you are using the
For answers to your Monogram
Filler strip or Backguard:
appliance questions, visit our website at
geappliances.com or call GE Answer Center
service, 800.626.2000.
Recommended
DROP-IN ELECTRIC RANGE
6" Min.
30" Min.
from walls
Recommended
6" Min.
from walls
30" Min.
Acceptable Electrical Outlet
23-3/16
Area Also In Adjacent
DROP-IN ELECTRIC RANGE
Cabinet Or Under Floor
If necessary,
build upsides
Recommended
to 1-1/4" thick
6" Min.
27-1/2
to provide
from walls
countertop
27-1/2
support
30
If you are NOT using the
Filler strip or Backguard:
If necessary,
build upsides
23-3/16
to 1-1/4" thick
to provide
countertop
27-1/2
30
support
30
2-7/8"
To Front Surface
of Countertop
24
If you are using the
Filler strip or Backguard:
2-7/8"
To Front Surface 25
of Countertop
30
23-3/16
30
20-5/8" Door
Clearance
From Front
30
Surface of
Countertop
2-7/8"
To Front Surface
® or GE ®
of Countertop
®
25
DROP-IN ELECTRIC RANGE
Recommended
6" Min.
from walls
30" Min.
15" Min.
30" Min. 23-3/16
Conduit is 40" long
Acceptable Electrical Outlet
23-3/16
Area Also In Adjacent
15" Min.
Cabinet Or Under Floor
If necessary, Conduit is 40" long
build upsides 25
to 1-1/4" thick
to provide
25
countertop 28-1/2
30" Min.
27-1/2
support
28-1/2
30" Min.
30
Acceptable Electrical Outlet
23-3/16
Area Also In Adjacent
Cabinet Or Under Floor
Conduit is 40" long
Above illustration intended for dimensional reference only.
Refer to photograph for actual product appearance.
23-3/16
Accessory
Backguard JXS32
24
31-1/4
2-7/8"
31-1/4
To Front Surface
of Countertop
30
20-5/8" Door
Clearance
25
From Front
Surface of
Countertop
27
25-3/4*
(excluding handle)
24
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
25-3/4*
required step in the installation
of the range.
(excluding handle)
*Total depth from wall to
front of closed oven door
including handle is 28-1/2.
20-5/8" Door
Clearance
30" Min.
30" Min.
Acceptable Electrical Outlet
Area Also In Adjacent
15" Min.
Cabinet Or Under Floor
Conduit is 40" long
25
28-1/2
30
15" Min.
Accessory
25
Backguard JXS32
28-1/2
4
24
31-1/4
4
27
20-5/8" Door
Clearance
From Front
Accessory
Surface of
Countertop Backguard JXS32
*Total depth from wall to
front of closed oven door
including handle is 28-1/2.
25-3/4*
(excluding handle)
4
31-1/4
Listed by
Underwriters
Laboratories
Specification Revised 9/14
27
Accesso
Backgua
4
27
*Total depth f
front of clos
including h