Shelf Positions - GE 19 Use And Care & Installation Manual

How to Rearrange Your Shelves
Some models have adjustable shelves in the fresh food and freezer
compartments, enabling you to make efficient shelf arrangements
to fit your family's food storage needs.
Adjustable Shelves in Fresh Food Compartment
To remove
shelves:
Tilt the
shelf up at front,
then lift it up and
out of the tracks
on the rear wall of
the refrigerator.
Multi-Position Shelves in Freezer Compartment
Shelf supports at various levels in the freezer
compartment let you reposition the shelves from time
to time to better accommodate your variable inventory
of frozen foods.
To reposition shelves:
1.
While pressing tabs on shelf
supports on right wall, lift shelf
out of grooves in supports.
(on
some models)
Cans of frozen juice
are easily accessible
when stored in the
rack on the freezer
compartment door.
To load it,
place first can
bottom of rack. Then
load additional cans into
the rack from the top.
6
Additional
cans go here
Place first
can here
(on some models)
To relocate shelves:
Select desired shelf
height. With shelf front
raised slightly, engage
the top lugs in the tracks
at the rear of the cabinet.
Then lower the front of
the shelf until it locks
into position.
Tempered glass shelves (on some models) are
adjustable in the same manner.
(on some models)
2. Pull shelf sideways until shelf
rods come out of holes on left wall.
3. Select desired shelf height and
insert shelf rods into holes on left
If shelf supports at desired
wall.
level on right wall have tabs,
lower shelf into grooves on '
support while pressing tabs. Be
sure shelf wire is fully inserted into grooves.
If shelf supports at desired
level on right wall do not have
tabs,
merely lower shelf into place
on supports.
Freezer Baskets
(on some models)
Wire slide-out freezer
baskets can be pulled
out for easy access to
frozen foods.
Engage
top lug
Lower to lock
into place