Usingauto Set - KitchenAid KERC507 Manual

"Using and Caring forYour Oven
Usingauto set
Auto Set lets you choose from among ten
preset oven cooking cycles. These cycles
store commonly used cooking times,
cooking temperatures, and probe tempera-
ture settings. Auto Set saves you time by
limiting the number of pads you have to
press when cooking at a favorite setting.
1. Place food in cold oven.
If you need the Temperature Probe for
your cycle (settings 5-8), insert probe
into food. (Follow Steps 1-4 in "Using
the temperature probe" on page 24.)
2. Set Auto Set cycle.
PRESS YOU SEE
Press desired Number pad.
Example:
PRESS
Example:
YOU SEE
(Use the "Auto set chart" on page 28
as your guide for selecting the correct
cycle.)
NOTES:
• You can change the Auto Set cycle
any time before pressing the Start/
Enter pad by repeating Step 2.
• The cooking setting, time, or probe
temperature will be displayed before you
press the Start/Enter pad.
3. Start oven.
PRESS
Example
For Auto
Set 5:
YOU SEE
NOTE: Cycles 1=4, 9, 0: To see the time
when the Auto Set cycle will end, press
the Stop Time pad.
When the Auto Set cycle is done,
"End" and the time of day will show in the
display. Four tones will sound, followed
by one short tone every minute, until you
open the door, remove the probe, or
press the Cancel/Off pad.
Examp/e:
YOU SEE
27