Table of Contents
Advertisement
File Operations
Overview
A remote computer can be connected to this unit and used
to operate on recorded data which has been saved in data
files, such as video and audio data files.
Use FAM (file access mode) for the computer connection.
Chapter
File Operations in File
Access Mode (for
Windows)
This software is intended for general purpose use.
Note
It is not intended for medical use.
File access mode operating environment
Operating system requirements for file operations by file
access mode are as follows.
• Computer operating system: Microsoft Windows XP
Professional SP2 or higher, or Microsoft Windows Vista
Ultimate/Business (32bit)
Preparations
Do the following on the remote computer and this unit.
• Install the FAM driver on the remote computer (see the
next item).
• In the setup menu, set INTERFACE SELECT >i.LINK
MODE to "FAM (PC REMOTE)" .(see page 80)
To install the FAM driver
Insert the supplied CD-ROM (XDCAM Application) into
the CD-ROM drive of your computer, navigate to the FAM
Driver directory, and run the installer in the directory for
your operating system.
For details, refer to the ReadMe file contained on the CD-
ROM disc.
Making FAM Connections
Proceed as follows.
Overview / File Operations in File Access Mode (for Windows)
5
67
Advertisement
Table of Contents
