Removing Secondary Hard Disk Drive - Lenovo ThinkCentre 7061 Hardware Installation And Replacement Manual

This section provides instructions on how to replace the secondary hard disk drive.
Important
When you receive a new hard disk drive, you also receive a set of Product
Recovery discs. The set of Product Recovery discs will enable you to restore the
contents of the hard disk drive to the same state as when your computer was
originally shipped from the factory. For more information on recovering
factory-installed software, refer to "Recovering software" in your User Guide.
To replace the secondary hard disk drive:
1. Remove the computer cover. See "Removing the cover" on page 11.
2. Locate the secondary hard disk drive. See "Drive specifications" on page 17.
3. Disconnect the signal and power cables from the hard disk drive.
4. Press the blue release button to release the hard disk drive cage from the
chassis.
Figure 24. Removing secondary hard disk drive
5. Remove the hard disk drive cage from the chassis by simply sliding it
outward.
6. Pull on the blue handle to release and remove the hard disk drive from the
hard disk drive cage.
7. Remove the hard disk drive from the blue plastic bracket by flexing the sides
of the bracket enough to slide it free of the hard disk drive.
Chapter 3. Installing options and replacing hardware
29