Sony DAV-DZ850KW Operating Instructions Manual page 104

General
Power requirements
Mexican models:
Latin American models:
Chinese models:
Taiwan models:
Other models:
Power consumption
Mexican models:
Latin American models:
Other models:
Output voltage (DIGITAL MEDIA PORT) (except for
Output current (DIGITAL MEDIA PORT) (except for
Dimensions (approx.)
Mass (approx.)
AC adaptor (AC-SD1)
Power requirements
Mexican models:
Latin American models:
Chinese models:
Taiwan models:
Other models:
Power consumption
Output voltage
Output current for SA-TS76W
Dimensions (approx.)
Mass (approx.)
Design and specifications are subject to change
without notice.
Unpacking
• Front speakers (2)
• Center speaker (1)
• Surround speakers (2)
• Subwoofer (1)
104
GB
120 V AC, 60 Hz
110 - 240 V AC, 50/60 Hz
220 V - 240 V AC,
50/60 Hz
120 V AC, 50/60 Hz
220 - 240 V AC, 50/60 Hz
On: 180 W
Standby: 0.3 W (at the
Power Saving mode)
On: 190 W
Standby: 0.3 W (at the
Power Saving mode)
On: 180 W
Standby: 0.3 W (at the
Power Saving mode)
Mexican and Latin
American models)
DC 5 V
Mexican and Latin
American models)
700 mA
430 × 63 × 380 mm (w/h/d)
incl. projecting parts
4.2 kg
120 V AC, 60 Hz
110 - 240 V AC, 50/60 Hz
220 V - 240 V AC,
50/60 Hz
120 V AC, 50/60 Hz
220 - 240 V AC, 50/60 Hz
On: 40 W
DC 28.0 V
1.5 A (maximum current is
8 A)
249 × 45 × 82 mm (w/h/d)
265 × 45 × 82 mm (w/h/d)
with cord
0.8 kg
• AM loop antenna (aerial) (1)
• FM wire antenna (aerial) (1)
• Speaker cords (6, red/white/green/gray/blue/purple)
• Speaker cords (OPTION) (2, gray/blue)*
• Video Cord (1)
• Remote Commander (remote) (1)
• R6 (size AA) batteries (2)
• Calibration mic (1)
• Foot pads (1 set)
• Posts (4)
• Bases (4)
• Mounting plates (4)
• Post covers (4)
• Screws (large, with washer) (16)
• Screws (small, silver) (8)
• Screws (small, black) (4)
• IR transmitter (1)**
• AC adaptor (1)
• Operating Instructions
• HDMI CONTROL Guide
• Speaker and TV connections (card)
* Use for connecting the surround speakers to the
system by the speaker cords.
** The IR transmitter cord is for this system only. You
cannot use a commercially available extension cord.
•Standby power consumption 0.3 W (or
less).
•Halogenated flame retardants are not
used in the printed wiring boards.
•Over 85 % power efficiency of
amplifier block is achieved with the
full digital amplifier, S-master.