Secure Dishwasher In Cabinet Opening - Maytag W10199707A Installation Instructions Manual

Secure Dishwasher in Cabinet Opening

Double check dishwasher
1
alignment in cabinet opening
Check that dishwasher is still level front to back and side
to side in cabinet opening.
IMPORTANT: If you have solid countertops such as
corrian, granite, etc., you must use side mounting kit
(Part Number 8212560). Follow kit instructions. (Brackets
are included with kit.)
2
Remove lower dish rack
and place towel
Open dishwasher door, remove lower dish rack, and
place towel over pump assembly and lower spray arm of
dishwasher. This will prohibit screws from falling into
pump area when securing dishwasher to countertop.
3
Secure dishwasher
NOTE: Do not drop screws into bottom of dishwasher.
Locate brackets on top of dishwasher and secure
dishwasher to countertop with two, #10 x 1/2" Phillips-
head screws (included). The dishwasher must be secured
to keep it from shifting when door is opened.
4 Check door clearance
Check that top of door does not contact screws,
brackets, or countertop. If it does, adjust leveling legs.
5 Check inner spacing
Open door and check that space between dishwasher
cabinet opening and tub is equal on both sides. If
spacing is not equal, loosen bracket screws secured
and shift tub. Tighten bracket screws.
Check side attachment
6
plastic
button
If securing with a side attachment, check that sides of door
do not rub against the screw heads. If they do, dishwasher
must be re-centered. When dishwasher is properly centered,
replace plastic buttons.
19