Table of Contents
Advertisement
INITIAL PREPARATIONS
Determine the operating voltage at the
installation site. The camera's Voltage
Regulator Board can accept a 12V DC or 24V
AC input. See Section 2, Input Power
Connections.
Determine the optimum location for the
camera. Section 3, Mounting-Camera Base.
All cameras have been tested prior to
shipment. After the wiring has been
reconnected, it is advisable to check the
camera's operation before installation.
ESD protection – Cameras and circuit boards
are sensitive electronic components. It is
recommended to wear a ground strap to
ground any static charge. (Alternative: touch a
grounded metal plate for at least a minute
before proceeding with any disassembly)
GUIDELINES
The installation of the EX40N camera is explained
in Sections 1 to 5 listed below. It is important that
these steps are followed in sequence:
1.
Dome Removal
2.
Input Power Connections
3.
Mounting - Camera Base
4.
Adjustments
5.
Camera Re-Assembly
3
Advertisement
Table of Contents
