Fujitsu ETERNUS DX80 S2 Cli User's Manual page 36

Chapter 2 Status Display
2.1 Storage System Status > show enclosure-status
SVC#n
FANU#n
OPNL
PSU#n
DISK#xyy
The following information is displayed if the device enclosure is specified:
Intake Temp
Exhaust Temp
IOM#0
IOM#1
PSU#0
PSU#1
DISK#xyy
Service Controller status and the status code (only for the ETERNUS DX8700 S2). The "#n" in the
field indicates the Service Controller number.
Example: SVC#1 [Status / Status Code]
(For Service Controller#1)
Fan Unit status and the status code (only for the ETERNUS DX8700 S2). The "#n" in the field
indicates the Fan Unit number.
Example: FANU#1 [Status / Status Code]
(For Fan Unit#1)
Operation Panel status and the status code (only for the ETERNUS DX8700 S2).
Power Supply Unit status and the status code. The "#n" in the field indicates the Power Supply
Unit number.
Example: PSU#1 [Status / Status Code]
(For Power Supply Unit#1)
Disk status (only for the ETERNUS DX80 S2/DX90 S2)
Example: CE-Disk#1 [ status ]
(Disk #001 status)
(For details, refer to "1.2.3 Disk Syntax" (page
Intake TempIntake temperature status, status code, and intake temperature values. Each
controller has two redundant intake temperature sensors, and both temperature values is
displayed in Celsius. If a sensor fails, "Failed" is displayed.
Exhaust temperature status and the status code.
Note that exhaust temperature values are not displayed.
I/O module #0 status and the status code
I/O module #1 status and the status code
Power Supply Unit #0 status and the status code
Power Supply Unit #1 status and the status code
Disk status
Example: DE#1-Disk#1 [ status ]
(Disk #101 status)
(For details, refer to "1.2.3 Disk Syntax" (page
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
19).)
19).)
36
P2X0-1030-09ENZ0