Error Messages - Sony STR-DN840 Operating Instructions Manual

Error messages

If there is a malfunction, a message appears
on the display panel. You can check the
condition of the system by the message. If
any problem persists, consult your nearest
Sony dealer.
PROTECTOR
Irregular current is output to the
speakers, or the receiver is covered and
ventilation holes are blocked. The
receiver will automatically turn off after
a few seconds. Remove the object
covering the upper panel of the receiver,
check the speaker connection and turn
on the power again.
USB FAIL
An over current from the
was detected. The receiver will
automatically turn off after a few
seconds. Check the iPod/iPhone or USB
device, then unplug it and turn on the
power again.
For other messages, see "Message list after
Auto Calibration measurement" (page 83),
"iPod/iPhone message list" (page 44),
"USB message list" (page 46) and
"Network features message list" (page 71).
Clearing the memory
Reference sections
To clear
All memorized settings
Customized sound fields
110
GB
About support
information
Refer to the following web site for details
of the latest information on the receiver.
For customer in Europe:
http://support.sony-europe.com/
For customer in Australia:
http://www.sony-asia.com/support
For customer in Latin America:
http://esupport.sony.com/LA
(USB) port
See
page 79
page 54