Brother DCP8080DN Service Update Information page 11

DCP8080DN, DCP8085DN, MFC8480DN, MFC8680DN, MFC8890DW
6. Remove the Separation R Shaft Bearing:
a. Release the hook on the bearing.
b. Push the end of the Separation Roller Drive Shaft to the left far enough to clear the hook on
the bearing.
c. Remove the bearing.
NOTE: Be careful not to detach the EG Actuator Spring when performing the
following steps.
EG Actuator
Spring
"No Paper" Message and Clicking Noise
March 22, 2010
b
a
Page 11 of 15
SERVICE
UPDATE No.
F1290
c