Maintenance And Service; Cleaning; Unpairing; Resetting - Siemens easyTek User Manual

Maintenance and service

Cleaning

NOTICE
Do not put your remote control in
X
water!
Do not clean your remote control
X
with alcohol or benzine.
Clean the remote control and the neckloop as
X
necessary with a dry or slightly damp soft cloth.
Use only distilled water to dampen the cloth.
Avoid any cleaning agents.
X

Unpairing

You can unpair all devices except our transmitters.
Press and simultaneously until the blue
X
and orange LED start flashing
This takes approximately 10 seconds.
easyTek unpairs the hearing instruments and
all Bluetooth devices except our transmitters.
easyTek searches for hearing instruments and Bluetooth
devices nearby . Turn your hearing instruments off
and on again to pair them with easyTek. In order to pair
other devices, refer to "Pairing Bluetooth devices".
To unpair our transmitters, you have to use the
easyTek App.
30
.

Resetting

In case of a system crash or if easyTek does not respond
when you press a button, you can reset the easyTek.
The reset does not affect the pairing status. All paired
devices remain paired.
Use a long thin tool, for
X
example, a wooden or plastic
toothpick, and press the
reset button.
31