Table of Contents
Advertisement
Figure 8-1
Transfer data to RF-MANAGER
All acquired data is transferred immediately to RF-MANAGER.
8.3
Application mode "Mobile"
In application mode "Mobile" that is configured via the Engineering System in
RF-MANAGER, you can check the read data for validity in the SIMATIC RF680M mobile
reader and reject any faulty reads. Only that data which you have acknowledged will be
transferred to RF-MANAGER.
Functional expansion by means of configuration in the Engineering System
When the function "Edit Tag" is activated in RF-MANAGER, you can display and edit all the
data for the read RFID tag.
8.3.1
Acquire data and transfer it to RF-MANAGER
Data acquisition
Depending on the configuration in the Engineering System, you can activate a barcode or
RFID read using the hardware keys, the RF-MANAGER or the "Scan" button of SIMATIC
RF680M.
If you have configured the reading of barcodes, the acquired barcode will be preceded by
"BAR".
If you have configured the reading of RFID tag data, the acquired tag ID will be preceded by
"RFID".
SIMATIC RF680M Mobile Reader
Operating Instructions, 06/2011, J31069-D0241-U001-A2-7618
List of RFID tag IDs.
The software "RF-MANAGER"
8.3 Application mode "Mobile"
33
Advertisement
Table of Contents
