Panasonic Workio DP-190 Operating Instructions Manual page 141

No. Parameter
024 PRINT REDUCTION
025 REDUCTION RATIO
026 POLLING PASSWORD
027 POLLED FILE SAVE
028 STAMP AT MEMORY
XMT
031 INCOMPLETE FILE
SAVE
036 RING PATTERN
DETECT (DRD)
(See Note 2)
037 RECEIVE TO MEMORY
038 ACCESS CODE
039 PIN CODE ACCESS
042 CONF. POLLED FILE
SAVE
043 PASSWORD-XMT
044 PASSWORD-RCV
046 SELECT RCV
Continued on the next page...
Setting Setting
Number
1 Fixed Selecting print reduction mode.
Fixed :Reduce received document according to
*2 Auto
Auto :Reduce received document according to the
70 70% Selecting the fixed print reduction ratio from 70% to
100%. This parameter functions only when the fixed
---- ----
print reduction is selected on Fax Parameter No. 24.
100 100%
(----) Setting a 4-digit password for secured polling.
*1 Invalid Selecting whether the machine retains the polled
document in memory even after the document is polled
2 Valid
once.
1 Invalid Selecting whether the machine stamps the original
documents when storing the documents into memory.
*2 Valid
(depending on the Stamp setting on the Control Panel.
If the setting is "Invalid", the machine will not stamp
even if the Stamp LED light is ON)
*1 Invalid Selecting whether the machine retains the document in
memory if the document is not successfully
2 Valid
transmitted.
*1 Invalid All ring patterns.
2 Valid Select a ring pattern for automatic answering.
1: A Standard ring pattern.
2: B Double ring pattern.
3: C Triple ring pattern (Short-Short-Long).
4: D All other triple ring patterns, except the
(----) Enter a 4-digit password used to print out the received
document in memory by using F8-5 (RCV TO
MEMORY). When F8-5 is set to On, this parameter will
not be shown on the LCD display.
(----) Enter a 4-digit Access Code to secure the machine
from unauthorized use. (See page 146)
*1 None Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code.
2 Suffix
3 Prefix
*1 Invalid Selecting whether the machine saves the confidential
polled file even after the file is polled once.
2 Valid
*1 Off Setting a 4-digit XMT-Password and selecting whether
the machine performs and checks the XMT-Password
2 On
of the receiving station when transmitting.
*1 Off Setting a 4-digit RCV-Password and selecting whether
the machine performs and checks the RCV-Password
2 On
of the transmitting station when receiving.
*1 Invalid Selecting whether the machine performs selective
reception. (See page 90)
2 Valid
Comments
setting of Parameter No. 25.
length of received documents.
type C described above.
141