10
Section B - Replacement of parts
8.0 HOW TO REPLACE THE WARMER DRAWER CONTROL (CONTINUED)
Figure 11
9.0 HOW TO REPLACE THE SLIDING CHANNELS
Figure 12
5. Remove the 2 screws. (Figure 11)
6. Replace the drawer control by the side access and
reassemble in reverse order.
1. Disconnect Warmer Drawer from electrical supply.
2. Remove the drawer from the drawer cavity. (Section 1.0)
3. Remove screws holding the sliding channel you have to
replace. (Figure 12)
4. Replace the sliding channel and reassemble in reverse
order.