LG GDK-186 User Manual page 26

GDK-162/100/FPII/20W & LDK-24/100/300/300E WOTS
Wireless Terminal (GDC-345H) User Guide
Caution: Intercom line transfer isn't supported by GDK-186/100/34E/20W WOTS system.
But, it is supported by LDK-130/300/600 system.
Screened Transfer
When the called station answers, inform the transfer.
Press
Unscreened Transfer
When the called station begins to ring,
X F E R F R O M
S T A X X X
Answering Screened Transfer
A user will hear intercom ring.
Answer intercom call and receive transfer notice.
If the transferring party hangs up, the outside call will be connected.
Executive/Secretary Transfer
If a station is designated as an Executive station and the station is busy or in DND(Do Not
Disturb), all calls will go to its Secretary station.
If a station is designated as a Secretary station, it may signal its Executive station which is
in DND by using the Call Wait feature.
* This feature is not available in GDK-20W.
Placing a CO Call on Hold
While you use a wireless terminal through CO line, you can use this function when you want to let
the outside caller wait for a moment.
Talk →
(Press longer than 1second)
X X X X X X X X X X
0 0 : 0 0
H O L D I N G
L N X X X
button to complete the transfer.
Press
tone is heard. Then, a message is displayed on the LCD of
the called station. If the call is not answered within 30
seconds, recall ring is ringing at both stations. At this time,
press
transferred call again.
While connected to a CO call (not intercom call),
Press HOLD(
hold. (Dial tone will be heard)
A message is displayed on the LCD as shown, and the hold
music is heard to the outside caller.
You have two kinds of choice, one is to retrieve a call and the
button to complete the transfer after ring back
button then a user will be connected with the
) button longer than 1 second for exclusive
２０