Speaker Call In A Group - Siemens Hipath 4000 Operation Manual

Making Calls – Convenience Functions
Step by step
n
74

Speaker call in a group

You can also establish a normal connection within a
group or team (with team call = speed dial numbers 0-
9 or 00-99 for team members) via a speaker call. The
speaker call is then initiated by a group telephone.
The COM group speaker call function is line-inde-
pendent - all phones can call each other via a
speaker call.
Speaker call to a variable destination
^
Lift the handset.
or
n
Press the key and enter speakerphone mode.
Enter the system code for "COM group speaker call"
(contact the relevant service personnel if necessary).
j
Enter the speed dial number for the corresponding
group member.
or
S
Press the "COM Group" sensor key.
j
Enter the speed dial number for the corresponding
group member.
A connection is immediately established to this destina-
tion station's loudspeaker if
• the station is not busy
• the handset has not been lifted
• the do not disturb function is not activated
^
The called party accepts the DSS call by lifting the hand-
set.
S
or
If the called party presses the speaker key or the line
key (if configured), the connection is lost.
Speaker call to a fixed destination
The system code for "COM group speaker call" and the
speed dial number for the corresponding group mem-
ber are programmed on a repdial key
S
Press the programmable repdial key. A connection to
the destination loudspeaker is immediately established.
^
The called party can accept the connection by lifting the
handset.
page 88.