Setup; Network Setup - D-Link DNR-202L User Manual

Section 5 - Configuration
Click the Setup icon to continue to configure advanced settings manually.
DHCP: Select this connection if you have a DHCP server running on your
network and would like a dynamic IP address to be automatically
updated to your NVR.
Static IP: You may obtain a static or fixed IP address and other network
information from your network administrator for your NVR. A static
IP address will simplify access to your NVR in the future.
IP Address: The static IP address.
Subnet Mask: The default value "255.255.255.0" is used to determine if the
destination is in the same subnet.
Gateway IP Address:
The gateway forwards frames to destinations in a different subnet.
Invalid gateway settings may cause the failure of transmissions to
a different subnet.
DNS1:
Primary domain name server that translates names to IP addresses.
DNS2: Secondary domain name server to backup the primary one.
DHCP Server:
Under Static IP, enable or disable the DHCP server. If your network
doesn't have a DHCP server, enable NVR DHCP server for easier local
network setup. You can configure the DHCP IP address range and
DHCP lease time manually.
Apple:
Enable Bonjour for multicasting. You can customize the NVR name
for identification by Bonjour services.
D-Link DNR-202L User Manual

Setup

Network Setup

46