Table of Contents
Advertisement
Above: Click "Remote Control > Telnet Console" on the web GUI to get the Telnet screen.
Telnet and SSH commands and their explanations
Display a list of supported commands.
help
Exit the current session and disconnect from the client.
quit
Clear the screen.
cls
Display the firmware version information (version, build number, description).
version
Activate terminal passthrough mode for the RS-232 serial port. This mode
terminal
provides Serial-over-IP functionality. The hotkey sequence "ESC + e-x-i-t"
(type "exit" while holding the ESC key) will switc the screen back to command
mode.
Auto-adjust the Host Console's video.
vscaa
This command resets the video modes. This is similar to the settings in the
vscreset
Host Console menu item Options > Video Settings.
The extensions of this command are described below:
53
Advertisement
Table of Contents
Troubleshooting
