UNIVERGE SV8100
System Hardware Manual
4.1.2
Install Cooling Fan
1.
Align replacement fan with holes and secure with two screws
(refer to
3-78.
2.
Install cabling into retention clips (refer to
Access Panel Removed on page 3-78
3.
Insert access panel hinges into slots on rear of chassis.
4.
Plug fan power cable into three prong plug (refer to
3-102 Opening Chassis Access Panel (19" Chassis) on page
3-78).
5.
Reinstall access cover and secure with retaining screw (refer to
Figure 3-101 19" Chassis Access Panel on page
Figure 3-103 Chassis Access Panel Removed on page
Issue 4.1
Figure 3-103 Chassis
Figure
3-77).
3 - 79