Problem Solving Guide; Messages In The Display - Miele TMV 840 WP Operating Instructions Manual

With the help of the following notes minor faults in the performance of the appli‐
ance, some of which may result from incorrect operation, can be put right without
contacting the Service Department.

Repair work to electrical appliances must only be carried out by a suitably
qualified person in strict accordance with current local and national safety regu‐
lations. Repairs and other work by unqualified persons could be dangerous.
The manufacturer cannot be held liable for unauthorised work.

Messages in the display

Problem
Code
lights up after
000
switching on

Adjust the load
lights up after a pro‐
gramme has been can‐
celled

Technical fault F
If restart is unsuccessful call
Service.
lights up after a pro‐
gramme has been can‐
celled
Cause and remedy
Access via a code has been activated.
 See "Settings menu, Code".
In some programmes, if the drum has been underloa‐
ded or is empty, the programme will be cancelled.
This can also happen if the items are already dry.
 Open and close the door to resume drying.
 Dry individual items using the Warm air timed dry‐
ing programme.
It may be that the laundry is unevenly distributed or
has rolled up.
 Disentangle the laundry and remove a few items, if
necessary.
 Start the programme again.
No obvious cause.
 Switch the dryer off and then on again.
 Start a programme.
If the programme is cancelled again and an error
message appears, there is a fault. Contact the Miele
Service Department.

Problem solving guide

65