About special screws
Special screws are used for this machine not to be remodeled the
inside by any users. Therefore, repair should be done with the driver
described below.
7-721-052-08
special driver
Drip-proof treatment
Always perform the following treatment when the Cabinet was
removed, or the Contact Board (ANT) Assembly was removed
during repair.
1. Apply SONY Grease SGL-505 (7-662-010-04) to entire sur-
face of Cabinet Rear Assembly marked with
(See Fig. A)
2. Apply Sealant TSE-392W (7-432-950-03) to entire surface of
Cabinet Rear Assembly marked with
Fig. A)
3. Apply SONY Grease SGL-505 (7-662-010-04) to entire sur-
face of Cabinet Rear Assembly marked with
(See Fig. B)
cabinet (front) assy
Apply grease
(SGL-505).
(FIg. A)
Apply grease
(SGL-505).
(FIg. B)
SECTION 1
SERVICING NOTES
using a swab.
using a swab. (See
using a swab.
cabinet (rear) assy
Apply sealant
(TSE-392W).
contact plate
(ANT) assy
cabinet (rear)
assy
– 3 –