Nokia N92 RM-100 Service Manual page 27

CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
19. Close the display connector.
21. Click the four snaps of the display into their places.
23. Set the correct torque.
Service Manual N92 RM-100
Page 27 (53)
CONFIDENTIAL
20. Check the positioning of the cables again before going on.
The "red marks" on the Coax Cable must be visible.
22. Insert new screws.
24. Tighten both screws.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
17.Okt.2006